Page 62 - North American Clean Energy September/October 2019 Issue

Solar Power International 2019
Time saving enclosure series
Fibox’s high impact resistance, watertight, UV resistant polycarbonate NEMA 4X ARCA – IEC enclosure series helps save time during assembly with a snap-in lockable inner front door, and an easy to mount DIN-Rail frame solution kit. The lockable door was designed to fit without the use of tools or hardware. The DIN-Rail kit allows installers to populate the rail outside the enclosure, then simply slide the rail assembly into
the enclosure base, and connect any wiring. The ARCA – IEC cabinet is an effective enclosing alternative to steel boxes.
Fibox
www.fiboxusa.com
Booth 3757
Heavy-duty, long-lasting batteries
Constructed with heavy-duty thick lead-antimony plates and a durable dual-container design, Rolls Series 5000 2-volt 2 KS 33P offers reliability and high Amp-Hour capacity for small to large-scale energy storage applications. Delivering long-term cycle life with industrial-grade components, Rolls Series 5000 Renewable Energy battery lineup provides dependable high-capacity energy storage in a range of voltage and capacity options, backed by a 5-year full replacement warranty.
Rolls Battery Engineering
www.rollsbattery.com
Booth 2728
Commercial solar mounting system
The POWER PEAK mounting system is designed for larger scale ground mount installations requiring fast build rates. Optimized to site-specific conditions, POWER PEAK mounting structures assemble over pile driven galvanized
“H” beams or C channels. The single row, vertical post design reduces the number of ground penetrations while providing increased ground clearance options. Also available in distributor kits with pre-assembled components, the POWER PEAK system provides a fast and secure mounting structure
for most PV modules. POWER PEAK structures are assembled without lifting equipment and do not require field modifications, including drilling or welding. Pre-assembled components, including the patent pending module clamps, significantly reduce installation time and labor. Structures are designed and manufactured to match module string counts to reduce wiring time
and materials. The unique module rails feature built-in wire channels for a professional appearance.
Preformed Line Products
www.preformed.com
Booth 4029
Energy storage fuses
SIBA Fuses 450VDC - 1500VDC (UL) ES fuses have a high breaking capacity for devices requiring protection. Careful system analysis is required to provide proper fusing. SIBA’s ES fuses are specifically designed and tested for the
DC/DC power converter for photovoltaic applications The Phoenix Contact family of Array Power DC-to-DC converters connect directly to a solar array. Array Power converts high-voltage DC from PV strings to 24VDC, eliminating the cost and
hassle of trenching to power combiner monitoring and inverter control for anti- islanding applications. Array Power DC- to-DC converters have wide DC voltage input ranges, and some models are suitable for 1000V and 1500V PV nominal solar arrays. Outputs are electrically isolated 24VDC with currents up to 8A. Array Power can be wired in parallel with the use of a decoupling diode for higher current applications or with a DC UPS
for back-up power. The Array Power has
a compact housing and high efficiency of more than 90%, so it can also be used in small control boxes. The LED monitoring simplifies startup. Array power is certified to UL 1741/62109, facilitating the approval of the overall system. When used with the recommended surge protection, Array Power is covered by the Phoenix Contact Limited Lifetime Warranty, assuring the operational reliability of the array.
Phoenix Contact
www.phoenixcontact.com
Booth 5163
Low profile solar mounting with microflashing
The patented Low Profile QuickBOLT with Microflashing is a solution for mounting solar on Asphalt Shingle Roofs. It can be installed without lifting shingles or removing nails and staples,
Visit Our Booth #4645 at the
2019 SOLAR POWER INTERNATIONAL TRADE SHOW
A Complete Portfolio of Comprehensive Engineering, Procurement, Construction Management & Testing Services for Project Development
Complete Electrical Power Systems Design Electrical EPC Design Interconnect Assistance & Electrical Studies Construction Services with Start-Up Ongoing Electrical Maintenance & Testing
For more information:
[email protected]
EPCSERVICES COMPANY
An ECI Company
www.electricalconsultantsinc.com
“Engineering with Distinction”
stringent requirements of ES applications.
SIBA Fuses
www.siballc.net
Booth 2319
saving installers time and money. The QuickBOLT with Microflashing has multiple layers of protection that create
a watertight seal. The Microflashing has passed standing and pressurized water tests and has been installed over 800,000 times with zero reported leaks. The QuickBOLT with Microflashing is now also tested and approved for TPO roofs.
QuickBOLT
www.quickbolt.com
Booth 4232
62
SEPTEMBER•OCTOBER2019 /// www.nacleanenergy.com